Today, we introduce how a heavy carton factory controls the quality of the production site. Their requirements are as follows:

按檢驗的目的可分為，控制檢驗，接收檢驗，質量機構檢驗鑒定。

According to the purpose of inspection, it can be divided into control inspection, receiving inspection and quality organization inspection and appraisal.

紙箱企業在確保紙箱產品質量的前提下，可因地制宜地設置質量檢驗機構及配備質量檢驗人員。工序檢驗一般有以下幾種形式，首件檢驗，首件檢驗是紙箱產品制造過程中的一種預防性檢驗，適用于大量的類型。首件檢驗應由操作者自行檢驗，并交由專職檢驗員認可。

On the premise of ensuring the quality of carton products, carton enterprises can set up quality inspection institutions and allocate quality inspection personnel according to local conditions. Process inspection generally has the following forms: first article inspection. First article inspection is a preventive inspection in the manufacturing process of carton products, which is applicable to a large number of types. The first article inspection shall be conducted by the operator and approved by the full-time inspector.

巡檢是檢驗人員在生產現場按一定的時間間隔對有關工序的產品質量進行流檢查。完工檢驗它是對一批加工完成后的產品進行檢查，主要是指各工序間的產品。成品檢驗是瓦楞紙箱產品到達用戶手中之前的*后一次檢驗。

Patrol inspection refers to the flow inspection of product quality of relevant processes by inspectors at a certain time interval on the production site. Completion inspection refers to the inspection of a batch of processed products, which mainly refers to the products between processes. The finished product inspection is the last inspection before the corrugated box products reach the users.

紙箱產品實物質量審核的內容如下：對紙箱的質量缺陷進行分級，分成重缺陷和輕缺陷，并寫出詳細檢驗項目。經實際審核后要記錄質量缺陷項目和審核結果。對質量缺陷要及時進行分析，盡可能詳細填寫紙箱質量審核報告報單，將審核結果向主管領導及有關部門報告，并作為質量信息和資料及時傳遞和存檔。

The contents of the physical quality audit of carton products are as follows: the quality defects of cartons are classified into heavy defects and light defects, and detailed inspection items are written. After the actual audit, the quality defect items and audit results shall be recorded. Analyze the quality defects in time, fill in the carton quality audit report as detailed as possible, report the audit results to the competent leaders and relevant departments, and timely transmit and archive them as quality information and data.

創造良好的生產秩序和環境。保持生產現場的清潔衛生，也是保證紙箱質量不可缺少的條件，如工區、器具、制品的堆放及般運，工人的操作環境、場地清潔度等因素對瓦楞紙箱質量的生產制作都有重要影響，均應有所規定。

Create a good production order and environment. Keeping the production site clean and hygienic is also an indispensable condition to ensure the quality of corrugated boxes. Factors such as stacking and general transportation of work areas, appliances and products, workers' operating environment and site cleanliness have an important impact on the production and production of corrugated boxes, which should be specified.

因此，對瓦楞紙箱生產現場可實行點、點位來進行有效控制。其措施可用：制定瓦楞紙箱生產現場管理標準，同時定期檢查考核、現場、機器、設備、原材料、在制品、工位、器具的定置定位情況。用效的措施減少紙箱搬運過程中的磕碰劃傷，污染和野蠻裝卸造成的損壞。對半成品和在制品要掛牌標識：尤其是紙板線下來的產品上面沒印字，如果不掛牌在出現同品種和規格相近的情況下，就很容易造成混亂與出錯。

Therefore, the corrugated box production site can be effectively controlled by point and position. Available measures: formulate on-site management standards for corrugated box production, and regularly check and assess the positioning of on-site, machines, equipment, raw materials, work in progress, stations and appliances. Effective measures shall be taken to reduce the collision, scratch, pollution and damage caused by rough handling in the process of carton handling. Semi finished products and products in process shall be listed for identification: especially the products off the paperboard line are not printed. If they are not listed, it is easy to cause confusion and error in the case of similar varieties and specifications.